NuFiber F3W375 Instruction Manual download pdf

Nudo Products, Inc.

1500 Taylor Avenue

Springfield, IL 62703

Phone 1.800.826.4132 * 1.217.528.5636

Fax 1.217.528.8722

Form 6005 Rev. 02 10/13

[email protected]

www.nudo.com

Nudo NuFiber™

Installation

Guidelines

6001.NF

______________________________________________________________ Rev. 02 10/13

Please Read Disclaimers:

PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION!!

These guidelines are provided in good faith to help prevent any problems caused by common

errors in installation. The manufacturer and/or distributor of this product shall not be held

responsible for installation actions taken or not taken. There are many details of installation that

are assumed to be general construction knowledge to experienced installers; which are no

included in these instructions. These installation guidelines are intended to be strictly

recommendations and are NOT to serve as a step-by-step, fail-safe installation checklist. Selection

of an experienced installer is the sole responsibility of the project owner and architect.

Nudo Products, Inc. does not accept any responsibility for job failure resulting from or associated

with improper site environmental conditions.

Safety Instructions:

When cutting or drilling, always wear protective glasses or

goggles and a face mask which covers the face and mouth.

Itching due to fibers may be avoided by the use of barrier

creams on exposed skin areas.

Tools Needed

 Circular saw with fine tooth carbide tipped saw

blade

 Power drill with carbide bits

 Trowel recommended by adhesive manufacturer

 Trim Cutter

Materials Needed

 NuFiber Panels

 Heavy duty construction adhesive

 Seam Finishing: PVC molding trim

 Silicone Sealant (for installation in high moisture

areas)

 Non-abrasive cleaner, soap and water, mineral

spirits, for use in clean-up

 Rags

 Sandpaper for roughing up walls

 Personal protection equipment (goggles & mask)

 Tape measure

 Saw horses

 Painter’s tape

 Plywood larger than panels

Preparation:

Storage

All NuFiber panels should be stored indoors on a solid, flat, dry surface.

Do not stand panels on edge or stack on fresh concrete floor or any other

surface that emits moisture. Lay panels flat with proper support on the

ends of panels. Optimum storage conditions are 60°F (16°C) to 75°F

(24°C) and 35% to 55% relative humidity.

1 2 3 4

Summary of Contents

Page 1 - Nudo NuFiber™

Nudo Products, Inc. 1500 Taylor Avenue Springfield, IL 62703 Phone 1.800.826.4132 * 1.217.528.5636 Fax 1.217.528.8722 Form 6005 Rev. 02 10/13 Info@

Page 2

Nudo Products, Inc. 1500 Taylor Avenue Springfield, IL 62703 Phone 1.800.826.4132 * 1.217.528.5636 Fax 1.217.528.8722 Form 6005 Rev. 02 10/13 Info@

Page 3 - Installation Steps

Nudo Products, Inc. 1500 Taylor Avenue Springfield, IL 62703 Phone 1.800.826.4132 * 1.217.528.5636 Fax 1.217.528.8722 Form 6005 Rev. 02 10/13 Info@

Page 4 - Finish Work

Nudo Products, Inc. 1500 Taylor Avenue Springfield, IL 62703 Phone 1.800.826.4132 * 1.217.528.5636 Fax 1.217.528.8722 Form 6005 Rev. 02 10/13 Info@

Comments to this Manuals

No comments

NuFiber F3W375 Instruction Manual

Browse online or download Instruction Manual for Unknown NuFiber F3W375. NuFiber F3W375 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals